UltraTrak Pressurized Floor Finish Applicator Machine For Solvent and Water Based Products by Fas-Trak, FT-5000-28.
Pressured with the lack of productivity? Overwhelmed with shrinking budgets? Burdened with increasing work and decreasing time? Fas-Trak Industries is proud to announce the ULTRA-TRAK, the 5-in-1 revolutionary application system! The ULTRA-TRAK is the most productive, pressurized floor finishing/sealing applicator on the market today. We had the user in mind when state-of-the-art technology and common sense engineering were combined to produce the most time efficient 5-In-1 applicator ever. This superior labor saving applicator is designed for all areas where professional quality finish and seal are required.
Standard Features:
- Apply Floor Finish or Sealer At 25,000 sq ft per hour, Up To 10x faster than traditional methods!
- Apply Mop On Restorers At 30,000 sq ft per hour.
- Clean Large Areas With The Fas-Mop Technique At 30,000 sq ft per hour.
- Apply Solvent Based Gym or Concrete Coatings At 20,000 sq ft per hour.
- CarpeTreater 28 Inch Pad Holder Applies Carpet Chemicals At 25,000 sq ft per hour.
- Environmentally Responsible: Cut Waste By Up To 20 per cent.
- Fully Automatic and Pressurized. Cleans Up In One Minute!
- Fully Adjustable Application Feature.
- Built In Charger With Battery Run Time of 5 to 7 Hours.
- Lightweight and Highly Portable!
To View Video Presentation Click Here.Technical Data For Ultra-Trak Universal Application System, Includes one Ultra-Trak 5-In-1 Applicator Base Unit and 28 inch head assembly and one Micro-Trak Applicator.
Technical Data on Ultra-Trak Applicator Base Unit
- Chassis/Body Construction Rotationally molded high tensile strength, impact resistant high-density polyethylene construction.
- Tray Housing 18 Gauge high carbon Powder coated steel construction with anti-vibe design.
- Motor Pump Series 4 DC voltage 45 psi pump mechanism with variable volume control circuitry.
- Flow Control Infinitely adjustable potentiometer to control proprietary flow characteristics to apply broad-spectrum perimeters of water/solvent floor coatings at range of 300 ? 4000 sq.ft per gal.
- Battery 12V 7amp hr sealed gel DC Battery with 8-pin charge/disconnect feature for change out purposes. Run time 2.5hrs. @60 mil output.
- Charger 1.5 amp built in Smart Charger with a built in low voltage indicator for 9.6 amps as the default setting.
- Head Assembly Feature 28 inch Head Assembly made for 18 gauge high carbon steel with chemical resistant powder coat with build in catch drip tray.
- Carpet Treater Padholder 28 inch Head assembly made with 18 gauge high carbon(optional) FT-2805 steel with chemical resistant powder coat. Works only with 28 inch head assembly and is interchangeable for use on application of carpet cleaning chemicals
- Spray Manifold Constructed of aluminum with special series 2ID orifices.
- Wheel 2 Semi-pneumatic non-marking wheels and 1 ball bearing rear caster wheel designed for full rotation.
- Origin Manufactured and assembled in USA.
- Warranty Molded housing ? 10 year warranty Other components ? 1 year
- Manufacturer Fas-Trak Industries
FREE Shipping Promotion Delivers Your New Ultra-Trak To Your Door! (Continental US Address Only)
Note: All Equipment Sales Are Final And Covered By Manufacturers Warranty.
Cleaning Stuff Service After The Sale (CLICK HERE)
