3M Trizact 27508 Diamond HX Discs Red Medium Grit 5 Inch For Polishing Stone, Marble, Terrazzo, Concrete, Box of 4 Discs, 3M, 27508-3M-BX4-D BONUS FREE SHIPPING

3M Trizact 27508 Diamond HX Discs Red Medium Grit 5 Inch For Polishing Stone, Marble, Terrazzo, Concrete, Box of 4 Discs, 3M, 27508-3M-BX4.

Red Medium Grit typically replaces conventional ANSI diamond abrasive grits 100 to 400 grit.

Diamond disc system for refurbishing and initial finishing of worn and damaged stone or concrete floors using standard low-speed rotary floor buffer scrubbers or automatic floor scrubber equipment. 5 Inch Discs are recommended for 16 Inch Machines and larger. 3 Inch Discs are recommended for smaller machines. Discs Consist Of:

• Precisely patterned, composite abrasive structures distributed uniformly on a flexible backing.
• As the structures wear, fresh, sharp diamond abrasive is continually exposed resulting in uniform, consistent, and fast cutting action through the life of the product.

The new 3M Trizact Diamond HX Discs are designed for use with the Scotchgard Stone Floor Protector and allow maintenance operations to turn dull and scratched stone or concrete floors into beautiful, shiny floors. The Trizact Diamond HX Discs consist of precisely patterned, composite abrasive structures distributed uniformly on a flexible backing. As these structures wear, fresh, sharp diamond abrasive is continually exposed, resulting in uniform, consistent and fast cutting action through the life of the product. Based on proprietary 3M technology, the Trizact Diamond HX Discs work with existing floor cleaning equipment. Costs for refurbishing stone or concrete floors using 3M Trizact Diamond HX with Scotchgard Stone Floor Protector are less than $1.00 per square foot versus up to $7.00 per square foot for traditional grinding and polishing procedures.

How long will a set of 4 discs last?

3M Trizact Diamond HX Disc life depends critically on use factors such as flooring type and condition, machine pressure and speed.

• Terrazzo: estimate 5,000 FINISHED ft2 (5,000 ft x 6 passes = 30,000 ft2 TOTAL)
• Concrete: due to variability in starting surface condition, estimate about 1,000 ft2 finished (1,000 ft x 6 passes = 6,000 ft2 TOTAL)

Suitable stone floor surfaces include, but are not limited to marble, terrazzo and polished concrete.

Follow these simple steps to a glossy finish:

• 1. Attach four 3M Trizact Diamond HX Red discs (red backing) to a 3M White Super Polish Pad 4100 in the 12:00, 3:00, 6:00 and 9:00 positions.
• 2. Make 4 passes with the 3M Trizact Diamond HX Red with squeegee up and solution on. 5th pass should be with squeegee down. 6th pass with squeegee up and solution on.
• 3. Attach four 3M Trizact Diamond HX Blue discs (Blue backing, 27507 or 27510) to a 3M White Super Polish Pad 4100 in the 12:00, 3:00, 6:00 and 9:00 positions.
• 4. Make 5 passes with the 3M Trizact Diamond Abrasive HX Blue with squeegee up and solution on. 6th pass should be with squeegee down.
• 5. Clean the floor with autoscrubber and water using the 3M Red Buffer Pad 5100 to remove any remaining residue.
• 6. Make four passes using a burnisher and the Scotch-Brite Purple Diamond Floor Pad Plus.
• 7. Dust the floor using the 3M Easy Trap Duster.
• 8. Wet the 3M Easy Shine Applicator Pad with the Scotchgard Stone Floor Protector and then apply a thin, uniform coat of Scotchgard Stone Floor Protector to the floor using the 3M Easy Shine Applicator System. Allow 15 to 30 minutes of drying time. Burnish the floor with the Scotch-Brite Purple Diamond Floor Pad Plus.
• 9. Dust the floor using the 3M Easy Trap Duster. Apply a second thin, uniform coat of Scotchgard Stone Floor Protector using the 3M Easy Shine Applicator System. Allow 15 to 30 minutes of drying time. Burnish the floor again using the Scotch-Brite Purple Diamond Floor Pad Plus.