Black Mark Resistant Metal Interlocked Floor Finish
Untouchable with Scuff Resistant Technology SRT is a low odor, black heel mark resistant floor finish that is an exceptional choice for those who want the highest gloss and wear with the least amount of labor. Untouchable with SRT is nonscuffing, durable, detergent resistant and maintains its high gloss with minimal burnishing, a real labor saver. Excellent leveling and low odor make it easy to apply
- Superior black heel mark resistance
- Extremely low odor
- Superior protection for your floor
- Self-sealing
- Coverage 2,000 - 3,000 square feet/gallon
- Drying time 20 - 30 minutes
- Warranty 2 years
- Heel mark resistance Excellent
- Fragrance Mild
- Freeze/thaw stability 3 cycles
- Gloss (ASTM D 1455-87) 1 coat 80 - 85 2 coats 97 - 98
- Gloss (ASTM D 1455-87) 2 coats 97 - 98
- Leveling Excellent
- pH 8.1 - 8.9
- Powdering resistance Excellent
- Recoat Very good
- Specific gravity 1.03
- Free styrene content 0.0
Recommended for use on all types of resilient tile flooring and properly prepared hard surfaces.
RESTORATIVE MAINTENANCE:
Completely remove all old wax, finish and soil from floor surface following strip procedure instructions on Betco® stripper label. Floor surface must be clean, dry and free of residue before finish is applied. Rinse with clean water if necessary. Apply finish in uniform, thin to medium coats using a clean synthetic finish mop, microfiber mop or applicator system. Allow each coat to dry thoroughly before applying additional coats, usually 20 - 30 minutes. Elevated temperatures, heavy coats and humidity may extend dry time. A minimum of 4 coats of finish is recommended. Note: This product is a self-sealing finish, however, if tile is old, worn or porous, initially applying 1 - 2 coats of a Betco sealer will enhance gloss and long term performance.