Hawk HP00173 Orbitec diamond abrasive pad holder for 17 inch Brute severe duty floor machines HP0017-3
The HAWK Orbitec Planetary Driver makes quick work of polishing large concrete and stone areas. Six independent sealed ball bearing pedestals spin 3” tools up to 400 RPM. Orbitec extends tool life through cool running. The counter- rotating heads work 60% faster than fixed tool drivers.
Engineered Design
- The Orbitec Driver mounts under most conventional design 1.5 HP floor machines, driving the Orbitec plate in a clockwise direction.
- The Orbitec mounting pedestals spin 3” diamond tools at 400 RPM in a counter-clockwise direction. This counter rotating operation spins diamond tools 60% faster than fixed mount drivers.
- The custom milled steel clutch plate provides easy on-and-off
mounting on your floor machine - Sold in three plate sizes; 13” (HP0013), 17” (HP0017-3) and 20” (HP0020-3)
- The electroplated 1/2” thick steel drive plate is built with replaceable pedestal heads.
- Black electrostatic coating
resists corrosion. - The Orbitec Driver mounts under most conventional design
- 1.5 HP floor machines, driving the Orbitec plate in a clockwise direction.
- Add the optional dust ring and vacuum hose mounting kits to your HAWK floor machine for dust containment
- These pedestals with are built with tool-holding hook facing securely mounting round diamond tools with loop backing.
- Diamond tools are quickly changed without shop tools
- Add optional machine weights to your HAWK severe-duty floor machine for greater down pressure and faster floor prep results
- Order diamond tools separately
Specifications:
- Plate size 17 inch
- 3 inch replaceable diamond resin tools sold seprately (CLICK HERE)
- Driver diameter 16.5 inch
- For the 1.5 HP / 175 RPM Severe-Duty Floor Machine
- Machine RPM 165
- Tool RPM 400
- Weight 46lbs
Specification Sheet (Click Here)
Note: All Equipment Sales Are Final And Covered By Manufacturers Warranty.